Front Runner Roof Racks for Land Rover

This 1560mm/61.4″ long, full-size, Slimline II cargo carrying roof rack kit for the Land Rover New Defender contains 1 Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.

Consisting of:

3x FASS013 – Foot Set / 60mm – 70mm
3x RRAC930 – Land Rover New Defender (L663) OEM Track Mount Kit
1x RRSTD08 – SLII Tray – 1255mm(W)X1560mm(L)
1x WDST009 – Wind Deflector 20mm Lip Wide Pair / 1345mm(W)

Material Used:
Black epoxy powder – coated T6 aluminium
High strength steel

Approximate Installed Weight: 54.34kg (119.8lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.

Kit Includes:

4 x LASS107 – No 7 Leg 225mm (Pair) – by Front Runner
1 x RRSTJ14 – Slimline II Tray – 1425mm(W) X 2772mm(L) – by Front Runner

Material Used:

Black epoxy powder-coated T6 aluminium
High strength steel

Approximate Installed Weight: 42kg (92lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.

If your vehicle has a DAB antenna, the tables can be inserted from either the right hand side or the left hand side of the roof rack to steer clear of the DAB antenna. If your vehicle does not have a DAB antenna, you may also orientate one table to mount from the rear of the roof rack.

Please note: This Rack kit is not compatible with the Land Rover factory OEM Ladder. Consider purchasing the Front Runner Ladder for Land Rover Disco 3,4 / LR3, LR4 instead. (Part #LALD004).

Kit Includes:

1x FALD003 – Land Rover Discovery LR3 + LR4 Foot Rails
1x RRSTD11 – SLII Tray – 1255mm(W)X2166mm(L)

Material Used:

Black epoxy powder – coated T6 aluminium
High strength steel

Approximate Installed Weight: 39.97kg (88.12lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

IAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

Kit Includes:

3 x LASS109 – No 9 Leg 265mm (Pair) – by Front Runner
1 x RRSTJ10 – Slimline II Tray – 1425mm(W) X 1964mm(L) – by Front Runner

Material Used:

Black epoxy powder-coated T6 aluminium
High strength steel

Approximate Installed Weight: 33kg (72lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Foot or Grab-on Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2″) to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.